(client version 5.23 or later)
The MOMI PC Client has the ability to be deployed with an initial default configuration. This default configuration allows new users to begin using the MOMI client without first defining the connection to each NonStop Systems. The default configuration capability is best suited where the client is accessed from a central server.
The feature is activated by placing a copy of the MOMI.INI named as MOMI_INIT.INI in the same subdirectory were the MOMI.EXE executable is located.
When the MOMI PC Client is launched and a MOMI.INI file is not found, it checks to see if a MOMI_INIT.INI file is present in the same subdirectory as the MOMI.EXE executable. If so, it copies the file and uses it as the initial configuration. If a MOMI_INIT.INI file is not present, a MOMI.INI file is created with minimal default values.
Note that once a MOMI PC Client is started that Windows User ID will have a MOMI.INI present in the following location:
Windows 10 and later -
C:\Users\<User ID>\AppData\Roaming\BlackWood Systems\MOMI\
Where <User ID> is the name used at logon to Windows. You must enable Show hidden files, folders and drives under Windows Folder Options to enable their display.
To use this feature, a MOMI administrator would:
1) start the MOMI PC Client.
2) set all screens and options to the desired default settings.
3) stop the client (important-to insure all settings are saved).
4) restart the client and export the MOMI.INI file named as MOMI_INIT.INI.
5) place the exported file in the same subdirectory as the MOMI.EXE executable in the shared location.
The location of the MOMI.INI file may be redirected via the run-time param INIPATH.